First design of the housing

Top view:

Bottom view:

I have completed a first draft design of the housing. Here are a few comment on the housing:

1. Take a close look at the Apple design of your dock connector. I have managed to take that connector apart without destroying it. It's a pretty sleek design, consisting only of two parts: a sleeve that goes around the connector and a cap that slides over the connector and inside of the sleeve. I have made the housing for the GPS module in a similar rounded/flat shape as the Apple sleeve. Apple's sleeve is 26.1mm x 9mm x 5.6mm (width x length x thickness). The GPS module housing is 25.4mm x 22.2mm x 8mm. So it is a little thicker as the dock connector and about 2.5 times as long.
2. You can see the micro USB connector on the left side of the module (top view).This plug can either accept micro USB-A or micro USB-B cables. I have found a trust-worthy supplier for the micro USB-B cable and the cable will be included with the GPS module to make life easy :).
3. On the top view you see a small green light. This is the LED indicator that displays the status of the GPS module: flashing orange means the module is searching for a satellite lock. Once a lock is found, the indicator will light steady green. My plan is to make this indicator aperture similar to Apple's MagSafe power adapter that is used on the MacBook.

In the meantime, I am playing with some more ideas to make the housing design even simpler...